IrDA Framework
ContentsIndexHome
PreviousUpNext
CwclIrDAClient Members

The following tables list the members exposed by CwclIrDAClient.

 
Name 
Description 
 
Fires the OnConnect event.  
 
Fires the OnCreateProcessor event.  
 
Fires the OnData event.  
 
Fires the OnDestroyProcessor event.  
 
Fires the OnDisconnect event.  
 
Name 
Description 
 
Frees the component.  
 
Connects to a remote device.  
 
Create a new IrDA client.  
 
Disconnects from the connected device.  
 
Gets the target IrDA device's address.  
 
Gets the IrDA connection mode.  
 
Gets the Data Processor created for the connection.  
 
Reads the read buffer size.  
 
Gets the IrDA service that should be used to connect. It can be a TinyTP service name or LSAP selector number. In case of using LSAP selector number the format is 'LSAP-SELn' where n is a select number in range from 1 to 127.  
 
Gets the connection state.  
 
Gets the connect timeout value.  
 
Reads the write buffer size.  
 
Sets the target IrDA device's address.  
 
Sets the IrDA connection mode.  
 
Sets the read buffer size.  
 
Sets the IrDA service that should be used to connect. It can be a TinyTP service name or LSAP selector number. In case of using LSAP selector number the format is 'LSAP-SELn' where n is a select number in range from 1 to 127.  
 
Sets connect timeout value.  
 
Sets the write buffer size.  
 
The event fires when a connection to a remote device has been completed (with or without success).  
 
The event fires when the remote connected device has been disconnected.  
 
This is the overview for the wclClientConnectionProcessorEvent method overload. 
 
The event fires when new data is received from the connected remote device.  
 
Sends data to the connected device.  
Copyright (c) 2006-2018. All rights reserved.