Bluetooth Framework
ContentsIndexHome
PreviousUpNext
TwclRfCommClientConnection Members

The following tables list the members exposed by TwclRfCommClientConnection.

 
Name 
Description 
 
Fires the OnConnect event.  
 
Fires the OnData event.  
 
Fires the OnDisconnect event.  
 
Implements a hardware-dependent code that communicate with the connected remote device.  
 
Implements a hardware-dependent code that connects to a remote device.  
 
Implements a hardware-dependent code that disconnects from the connected remote device.  
 
Reads the read buffer size.  
 
Reads the write buffer size.  
 
Sets the read buffer size.  
 
Sets the write buffer size.  
 
Implements a hardware-dependent code that sends data to the connected device.  
 
The internal disconnect method. Disconnects from a connected remote device.  
 
The method called when a new notification message received.  
 
Send a Disconnect notification message.  
 
Send a data notification message.  
 
Name 
Description 
 
The event fires when a connection to a remote device has been completed (with or without success).  
 
The event fires when new data is received from the connected remote device.  
 
The event fires when the remote connected device has been disconnected.  
 
Name 
Description 
 
Connects to a remote device.  
 
Create new Classis Bluetooth client connection.  
 
Frees the connection.  
 
Frees the connection.  
 
Disconnects from the connected remote device.  
 
Reads the read buffer size.  
 
Reads the write buffer size.  
 
Sets the read buffer size.  
 
Sets the write buffer size.  
 
Sends data to the connected device.  
 
Name 
Description 
 
Gets a remote device MAC address.  
 
Gets the authentication value.  
 
Gets the target service RFCOMM channel number. 0 to auto detection.  
 
Gets the encryption state of the connection.  
 
Gets the current Data Processor object assigned to the Connection.  
 
Gets the connection owner.  
 
Gets the connection message receiver object.  
 
Gets the target Bluetooth service UUID used for connection.  
 
Gets the connection state.  
 
Gets the connection's thread ID.  
 
Gets the connect timeout value.  
Copyright (c) 2006-2019. All rights reserved.